> Hello All,I took last couple of weeks to figure it out what the real
> scenario is with the N5000 switch. I contacted with cisco technical
> personnels and inquired them about this issue of supporting. They informed
> me that :
>
> The Nexus 5000 does not support VTP and does not support StackWise, so
> consequently you will not find the respective MIB?s for those two
> technologies on any current or planned NX-OS release for the Nexus 5000.
> So there is no possibility to upgrade the OS version of the switch to have
> the missing MIBs nor there is another way (by changing the source code or
> some other way) to accommodate the VTP through the usage of other MIBs/OIDs
> as N5000 does not support VTP functionalities.
>
> Therefore I am now in a dilemma regarding how to make emulab system works
> wwith this N5000 switch.It would be great if anybody of you can kindly put
> some lights on this.
>
> Thanking you
> Azad
>
> On Tue, Jul 14, 2009 at 1:18 AM, Robert P Ricci <
ricci@cs.utah.edu> wrote:
>
> > Thus spake Mohammed Azad on Sat, Jul 11, 2009 at 11:21:39AM -0500:
> > > Hello Mr. Ranadive,
> > > If STACK-MIB was the only MIB that is missing, then I could follow your
> > > suggestion more easily and set up the port speed at the console by
> > manually
> > > (which, infact, I will do).But the problem is - VTP-MIB is also not
> > > present.Dynamic VLAN creation/deletion is done by setting the OIDs of
> > > VTP-MIB.
> > >
> > > Can you please give any idea regarding this?
> >
> > Yes, the operations done from VTP-MIB will need to be ported to your new
> > switch in order for snmpit to be useful on it.
> >
> > --
> > /-----------------------------------------------------------
> > | Robert P Ricci <
ricci@cs.utah.edu> | <
ricci@flux.utah.edu>
> > | Research Associate, University of Utah Flux Group
> > |
www.flux.utah.edu |
www.emulab.net
> > \-----------------------------------------------------------
> >