Hi, It seems that the Cisco 4006, 4506 switches the MIB which is used in the newer version of emulab software does not work. We had the same switches running with the older version of emulab and it worked fine. Has there been some significant changes between the emulab versions for the snmp and/or MIB support? If so, is there a way to switch to the older version of snmp? The current version of emulab is 080901 (from the tar.gz file) Thanks, Adit Adit Ranadive wrote: So, if you do the following: snmpwalk -m all <switchname> <communitystring> portAdminSpeedThat does not return anything I tried snmpwalk -m all <switchname> <communitystring> system.sysDescr which returns: system.sysDescr.0 = Cisco Internetwork Operating System Software IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(18)EW1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2004 by cisco Systems, Inc. Any pointers to why its failing? Thanks, Adit _______________________________________________ Testbed-admins mailing list Testbed-admins@flux.utah.edu http://www.flux.utah.edu/mailman/listinfo/testbed-admins |