| Mike Hibler <mike@flux.utah.edu>
04/06/2009 04:52 PM |
|
# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.4-PRERELEASE #0: Thu Sep 4 08:49:30 MDT 2008
root@node.freebsd63-node.emulab-ops.emulab.net:/usr/obj/usr/src/sys/TESTBED-PXEBOOT-GENERIC
Preloaded elf kernel "/boot/kernel" at 0xc2c3b000.
Preloaded md_image "/boot/mfsroot" at 0xc2c3b1ac.
Preloaded elf module "/boot/acpi.ko" at 0xc2c3b1f0.
MP Configuration Table version 1.4 found at 0xc009b5a1
Table 'FACP' at 0x7ff039fe
Table 'SSDT' at 0x7ff03a72
Table 'SRAT' at 0x7ff03dd6
Table 'SPCR' at 0x7ff03ebe
Table 'MCFG' at 0x7ff03f0e
Table 'APIC' at 0x7ff03f4a
MADT: Found table at 0x7ff03f4a
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
ACPI APIC Table: <PTLTD APIC >
Calibrating clock(s) ... i8254 clock: 1193196 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2010312739 Hz
CPU: Dual-Core AMD Opteron(tm) Processor 2212 (2010.31-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x40f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 2146369536 (2046 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000088fff, 557056 bytes (136 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000003025000 - 0x000000007daa4fff, 2057830400 bytes (502400 pages)
avail memory = 2057658368 (1962 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f78b0
bios32: Entry = 0xfdd34 (c00fdd34) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfdd30+0x0
pnpbios: Found PnP BIOS data at 0xc00f7940
pnpbios: Entry = e627:8bef Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Sep 4 2008 08:49:21)
hptrr: HPT RocketRAID controller driver v1.1 (Sep 4 2008 08:49:20)
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80004000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=050000] [hdr=00] is there (id=036910de)
pcibios: BIOS_PRESENT call failed
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P44_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.K802.HMM2 -> bus 0 dev 25 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xdc729000 pa 0x88000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.K801.HMM0 -> bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.K801.HMM1 -> bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SM74 -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P60_ -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P64_ -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P68_ -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA0 -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA1 -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.MMTO -> bus 0 dev 1 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 16 N 0 16 17 18 19 20 21 22 23
Validation 0 16 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x10de, dev=0x0369, revid=0xa2
bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0364, revid=0xa3
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00001c00, size 7, enabled
found-> vendor=0x10de, dev=0x0368, revid=0xa3
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00003000, size 6, enabled
map[20]: type 4, range 32, base 00003440, size 6, enabled
map[24]: type 4, range 32, base 00003400, size 6, enabled
found-> vendor=0x10de, dev=0x036c, revid=0xa1
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c8004000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LUS0:0)
pci_link9: Picked IRQ 16 with weight 0
ioapic0: Changing polarity for pin 16 to high
pcib0: slot 2 INTA routed to irq 16 via \\_SB_.PCI0.LUS0
found-> vendor=0x10de, dev=0x036d, revid=0xa2
bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c8005000, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.LUS2:0)
pcib0: slot 2 INTB routed to irq 16 via \\_SB_.PCI0.LUS2
found-> vendor=0x10de, dev=0x036e, revid=0xa1
bus=0, slot=4, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00003480, size 4, enabled
found-> vendor=0x10de, dev=0x037f, revid=0xa3
bus=0, slot=5, func=0
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type 4, range 32, base 000009f0, size 3, enabled
map[14]: type 4, range 32, base 00000bf0, size 2, enabled
map[18]: type 4, range 32, base 00000970, size 3, enabled
map[1c]: type 4, range 32, base 00000b70, size 2, enabled
map[20]: type 4, range 32, base 00003490, size 4, enabled
map[24]: type 1, range 32, base c8006000, size 12, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.LTID:0)
pci_link15: Picked IRQ 17 with weight 0
ioapic0: Changing polarity for pin 17 to high
pcib0: slot 5 INTA routed to irq 17 via \\_SB_.PCI0.LTID
found-> vendor=0x10de, dev=0x037f, revid=0xa3
bus=0, slot=5, func=1
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type 4, range 32, base 000009e0, size 3, enabled
map[14]: type 4, range 32, base 00000be0, size 2, enabled
map[18]: type 4, range 32, base 00000960, size 3, enabled
map[1c]: type 4, range 32, base 00000b60, size 2, enabled
map[20]: type 4, range 32, base 000034a0, size 4, enabled
map[24]: type 1, range 32, base c8007000, size 12, enabled
pcib0: matched entry for 0.5.INTB (src \\_SB_.PCI0.LSI1:0)
pci_link16: Picked IRQ 18 with weight 0
ioapic0: Changing polarity for pin 18 to high
pcib0: slot 5 INTB routed to irq 18 via \\_SB_.PCI0.LSI1
found-> vendor=0x10de, dev=0x037f, revid=0xa3
bus=0, slot=5, func=2
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type 4, range 32, base 00003800, size 3, enabled
map[14]: type 4, range 32, base 000034f4, size 2, enabled
map[18]: type 4, range 32, base 000034f8, size 3, enabled
map[1c]: type 4, range 32, base 000034f0, size 2, enabled
map[20]: type 4, range 32, base 000034b0, size 4, enabled
map[24]: type 1, range 32, base c8008000, size 12, enabled
pcib0: matched entry for 0.5.INTC (src \\_SB_.PCI0.LSI2:0)
pci_link17: Picked IRQ 19 with weight 0
ioapic0: Changing polarity for pin 19 to high
pcib0: slot 5 INTC routed to irq 19 via \\_SB_.PCI0.LSI2
found-> vendor=0x10de, dev=0x0370, revid=0xa2
bus=0, slot=6, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x0a (2500 ns)
found-> vendor=0x10de, dev=0x0373, revid=0xa3
bus=0, slot=8, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 8 messages, 64 bit, vector masks
MSI-X supports 8 messages in maps 0x18 and 0x1c
map[10]: type 1, range 32, base c8009000, size 12, enabled
map[14]: type 4, range 32, base 00003808, size 3, enabled
map[18]: type 1, range 32, base c8005800, size 8, enabled
map[1c]: type 1, range 32, base c8005400, size 4, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LMAC:0)
pci_link12: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 8 INTA routed to irq 20 via \\_SB_.PCI0.LMAC
found-> vendor=0x10de, dev=0x0373, revid=0xa3
bus=0, slot=9, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 8 messages, 64 bit, vector masks
MSI-X supports 8 messages in maps 0x18 and 0x1c
map[10]: type 1, range 32, base c800b000, size 12, enabled
map[14]: type 4, range 32, base 00003810, size 3, enabled
map[18]: type 1, range 32, base c800a000, size 8, enabled
map[1c]: type 1, range 32, base c8005c00, size 4, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LMA2:0)
pci_link10: Picked IRQ 21 with weight 0
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 9 INTA routed to irq 21 via \\_SB_.PCI0.LMA2
found-> vendor=0x10de, dev=0x0376, revid=0xa3
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0378, revid=0xa3
bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0377, revid=0xa3
bus=0, slot=15, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1c00-0x1c7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc8004000-0xc8004fff irq 16 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc8004000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc8005000-0xc80050ff irq 16 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xc8005000
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3480-0x348f at device 4.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3480
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=50
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=20 stat1=00 devices=0x8<ATAPI_SLAVE>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0x3490-0x349f mem 0xc8006000-0xc8006fff irq 17 at device 5.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3490
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc8006000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70
ata3: SATA connect status=00000000
ata3: [MPSAFE]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0x34a0-0x34af mem 0xc8007000-0xc8007fff irq 18 at device 5.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x34a0
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53
atapci2: [MPSAFE]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc8007000
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60
ata5: SATA connect status=00000000
ata5: [MPSAFE]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0x3800-0x3807,0x34f4-0x34f7,0x34f8-0x34ff,0x34f0-0x34f3,0x34b0-0x34bf mem 0xc8008000-0xc8008fff irq 19 at device 5.2 on pci0
atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0x34b0
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
atapci3: [MPSAFE]
atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc8008000
ata6: <ATA channel 0> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x3800
atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0x34f4
ata6: SATA connect status=00000000
ata6: [MPSAFE]
ata7: <ATA channel 1> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x34f8
atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0x34f0
ata7: SATA connect status=00000000
ata7: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x4000-0x4fff
pcib1: memory decode 0xc8100000-0xc81fffff
pcib1: prefetched decode 0xd0000000-0xd7ffffff
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x515e, revid=0x02
bus=1, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0287, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib1: requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type 4, range 32, base 00004000, size 8, enabled
pcib1: requested I/O range 0x4000-0x40ff: in range
map[18]: type 1, range 32, base c8100000, size 16, enabled
pcib1: requested memory range 0xc8100000-0xc810ffff: good
pcib1: matched entry for 1.4.INTA (src \\_SB_.PCI0.LNK2:0)
pci_link1: Picked IRQ 22 with weight 0
ioapic0: Changing polarity for pin 22 to high
pcib1: slot 4 INTA routed to irq 22 via \\_SB_.PCI0.LNK2
pci1: <display, VGA> at device 4.0 (no driver attached)
pci0: <bridge> at device 8.0 (no driver attached)
pci0: <bridge> at device 9.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xc8200000-0xc82fffff
pcib2: prefetched decode 0xd8000000-0xd8ffffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x14c1, dev=0x0008, revid=0x00
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 64, base d8000000, size 24, enabled
pcib2: requested memory range 0xd8000000-0xd8ffffff: good
map[18]: type 1, range 64, base c8200000, size 20, enabled
pcib2: requested memory range 0xc8200000-0xc82fffff: good
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LK3E:0)
pci_link6: Picked IRQ 23 with weight 0
ioapic0: Changing polarity for pin 23 to high
pcib2: slot 0 INTA routed to irq 23 via \\_SB_.PCI0.LK3E
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfff00000-0xfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: failed to reset the aux device.
sio0: irq maps: 0x1c29 0x1c39 0x1c29 0x1c29
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio1: irq maps: 0x1c29 0x1c39 0x1c29 0x1c29
sio1: <16550A-compatible COM port> port 0x3e8-0x3ef irq 4 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
fdc0: [MPSAFE]
fdc0: [FAST]
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 131990 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100515650 hz
Timecounter "TSC" frequency 2010312739 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
hptrr: no controller detected.
md0: Preloaded image </bofdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ot/mfsroot> 33554432 bytes at 0xc0bdced8
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on nForce MCP55 chip
acd0: setting UDMA33 on nForce MCP55 chip
acd0: <DV-28E-R/1.8A> DVDROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 239372MB <WDC WD2500YD-01NVB1 10.02E01> at ata2-master SATA300
ad4: 490234752 sectors [486344C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
nfs_diskless: no interface
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/md0c
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
#
# pciconf -lv
none0@pci0:0:0: class=0x050000 card=0x291210f1 chip=0x036910de rev=0xa2 hdr=0x00
class = memory
subclass = RAM
isab0@pci0:1:0: class=0x060100 card=0x291210f1 chip=0x036410de rev=0xa3 hdr=0x00
class = bridge
subclass = PCI-ISA
none1@pci0:1:1: class=0x0c0500 card=0x291210f1 chip=0x036810de rev=0xa3 hdr=0x00
class = serial bus
subclass = SMBus
ohci0@pci0:2:0: class=0x0c0310 card=0x291210f1 chip=0x036c10de rev=0xa1 hdr=0x00
class = serial bus
subclass = USB
ehci0@pci0:2:1: class=0x0c0320 card=0x291210f1 chip=0x036d10de rev=0xa2 hdr=0x00
class = serial bus
subclass = USB
atapci0@pci0:4:0: class=0x01018a card=0x291210f1 chip=0x036e10de rev=0xa1 hdr=0x00
class = mass storage
subclass = ATA
atapci1@pci0:5:0: class=0x010185 card=0x291210f1 chip=0x037f10de rev=0xa3 hdr=0x00
class = mass storage
subclass = ATA
atapci2@pci0:5:1: class=0x010185 card=0x291210f1 chip=0x037f10de rev=0xa3 hdr=0x00
class = mass storage
subclass = ATA
atapci3@pci0:5:2: class=0x010185 card=0x291210f1 chip=0x037f10de rev=0xa3 hdr=0x00
class = mass storage
subclass = ATA
pcib1@pci0:6:0: class=0x060401 card=0xcb8410de chip=0x037010de rev=0xa2 hdr=0x01
class = bridge
subclass = PCI-PCI
none2@pci0:8:0: class=0x068000 card=0x291210f1 chip=0x037310de rev=0xa3 hdr=0x00
class = bridge
none3@pci0:9:0: class=0x068000 card=0x291210f1 chip=0x037310de rev=0xa3 hdr=0x00
class = bridge
pcib2@pci0:10:0: class=0x060400 card=0x000010de chip=0x037610de rev=0xa3 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib3@pci0:13:0: class=0x060400 card=0x000010de chip=0x037810de rev=0xa3 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib4@pci0:15:0: class=0x060400 card=0x000010de chip=0x037710de rev=0xa3 hdr=0x01
class = bridge
subclass = PCI-PCI
hostb0@pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb1@pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb2@pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb3@pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb4@pci0:25:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb5@pci0:25:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb6@pci0:25:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb7@pci0:25:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
class = bridge
subclass = HOST-PCI
none4@pci1:4:0: class=0x030000 card=0x515e1002 chip=0x515e1002 rev=0x02 hdr=0x00
class = display
subclass = VGA
none5@pci2:0:0: class=0x020000 card=0x000814c1 chip=0x000814c1 rev=0x00 hdr=0x00
class = network
subclass = ethernet
#Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature